How to Prepare an RFQ for Hot-Mix Colored Asphalt: A Buyer’s Specification Guide


How to Prepare an RFQ for Hot-Mix Colored Asphalt: A Buyer’s Specification Guide

When buyers ask for a hot-mix colored asphalt quotation, one of the most common messages is simply:

“How much is colored asphalt per ton?”

Unfortunately, this is usually not enough information for an accurate quotation.

The cost and material system can change significantly depending on:

  • Required color
  • Project area
  • Pavement thickness
  • Traffic type
  • Aggregate source
  • Asphalt plant availability
  • Binder selection
  • Pigment dosage
  • Shipping destination

A better RFQ helps both the buyer and supplier avoid misunderstandings before production begins.

This guide explains what information should be included when requesting a quotation for hot-mix colored asphalt.

Why Is a Detailed RFQ Important?

Hot-mix colored asphalt is not a single universal product.

A red bike lane and a yellow bus lane may require very different material and performance considerations.

Even two red asphalt projects may differ because of:

  • Climate
  • Aggregate
  • Traffic
  • Binder
  • Target shade

The more project information the supplier receives, the easier it is to recommend the correct material system.

A professional RFQ should answer three basic questions:

Where will it be used?
What performance is required?
What color and quantity are needed?

Start With the Project Application




The first thing to tell the supplier is where the colored asphalt will be used.

Typical applications include:

  • Bike lanes
  • Landscape roads
  • Parks
  • Public plazas
  • Pedestrian streets
  • Bus lanes
  • Parking areas
  • School zones
  • Residential roads
  • Resort developments

Application matters because traffic stress varies significantly.

For example:

A park path does not experience the same loading as a bus lane.

The supplier needs to understand the pavement function before recommending a binder and mix strategy.

 Provide the Total Project Area

Always provide the approximate area in:

m²

For example:

Project area: 3,500 m²

This immediately helps estimate the required asphalt tonnage.

If the area is not yet confirmed, provide:

  • Road length
  • Road width

For example:

Length: 1,000 m
Width: 3 m

Approximate area:

1,000 × 3 = 3,000 m²

 Specify the Compacted Thickness

Thickness has a major effect on material quantity.

Do not ask only:

“How much material do I need?”

Also provide the planned compacted thickness.

For example:

  • 30 mm
  • 40 mm
  • 50 mm

A simple preliminary calculation is:

Asphalt Tonnage = Area × Compacted Thickness × Mix Density

For example:

1,000 m² × 0.03 m × 2.35 t/m³

≈ 70.5 tons

The density here is only a calculation example.

Final density should come from the approved mix design.

 Clearly Define the Required Color




“Colored asphalt” is too general.

Tell the supplier whether you need:

  • Red
  • Yellow
  • Green
  • Blue
  • Brown
  • Beige
  • Custom color

Even within one color family, different shades may be required.

For red asphalt, buyers may want:

  • Bright red
  • Brick red
  • Dark red
  • Orange-red

Reference photos can help.

For important architectural projects, a physical sample or trial mix is more reliable than screen colors.

Explain the Traffic Conditions

Traffic is one of the most important engineering factors.

Tell the supplier whether the pavement will carry:

  • Pedestrians
  • Bicycles
  • Passenger cars
  • Buses
  • Trucks
  • Maintenance vehicles

Also indicate whether traffic is:

  • Light
  • Moderate
  • Heavy

For example:

Application: Bus lane
Traffic: Heavy daily bus traffic
High-stress areas: Bus stops and intersections

This provides much more useful information than simply saying “red road.”

Tell the Supplier Whether It Is New Construction or Renovation

This determines whether hot-mix colored asphalt is actually the most practical solution.

New Construction

Hot-mix colored asphalt may be an excellent option because the colored layer can be integrated into the pavement structure.

Existing Asphalt Renovation

The supplier may need to compare:

  • Hot-mix colored asphalt overlay
  • Colored pavement coating
  • Cold-mix solution

If the existing pavement is structurally sound, complete replacement may not always be necessary.

 Provide Information About the Existing Base

For renovation projects, describe the current pavement.

Is it:

  • Asphalt?
  • Concrete?
  • Gravel base?
  • New base course?

Also mention visible problems such as:

  • Cracking
  • Rutting
  • Settlement
  • Potholes
  • Poor drainage

A colored surface cannot solve serious structural failure underneath.

 Tell the Supplier About Local Aggregate




For overseas projects, this is extremely important.

Large quantities of aggregate are usually better sourced locally when suitable material is available.

Tell the supplier:

  • Aggregate type
  • Natural color
  • Available sizes
  • Quarry location
  • Gradation information

Photos are useful.

Physical samples are even better for major projects.

A common international supply model is:

Local Aggregate + Imported Light-Colored Binder + Imported Pigment

This can significantly reduce freight cost.

 Provide Asphalt Plant Information

If you already have a local asphalt plant, tell the supplier.

Useful information includes:

  • Plant type
  • Batch capacity
  • Previous colored asphalt experience
  • Pigment dosing capability
  • Binder storage capability

This matters because not every conventional asphalt plant is equally suitable for colored asphalt production.

Plant changeover and contamination control should be considered before mass production.

 Specify Whether You Need Complete Materials or Specialized Materials Only

Some buyers need a complete system.

Others already have local aggregate and only need:

  • Light-colored binder
  • Pigment

So clearly state your requirement.

For example:

We have local aggregate and asphalt plant. We need light-colored binder and red iron oxide pigment.

This makes the quotation much more accurate.

Ask for a Trial Mix Before Large Orders




For large projects, the RFQ should include:

Trial mix / sample approval required before mass production.

This is especially important for:

  • Yellow
  • Blue
  • Green
  • Beige
  • Custom colors

A trial mix allows the project team to evaluate:

  • Final color
  • Aggregate compatibility
  • Pigment dosage
  • Surface texture

The approved compacted sample then becomes the reference for mass production.

 Include the Project Location

International freight can significantly affect total project cost.

Provide at least:

  • City
  • Country
  • Nearest port

For example:

Project location: Manila, Philippines

or:

Destination port: Port Klang, Malaysia

Without a destination, a supplier can normally quote only the material price—not the delivered cost.

 Clarify Your Shipping Requirement

Tell the supplier whether you need:

  • EXW
  • FOB
  • CIF
  • Door-to-door delivery

If you already have a freight forwarder in China, mention it.

For example:

Our logistics company can collect the goods from your factory.

This may simplify the quotation.

 State the Expected Project Schedule

Provide an approximate timeline.

For example:

Trial required: November
Mass production: December
Construction: January

This helps suppliers plan:

  • Raw materials
  • Production
  • Samples
  • Shipping

Especially for large projects, production planning should begin early.

 Ask About Packaging

Different materials may use different packaging.

The buyer should confirm:

  • Net weight per package
  • Palletization
  • Container loading quantity
  • Storage requirements

This is particularly important for international shipping and site handling.

 Ask About Storage Conditions




The supplier should explain how materials should be stored before use.

Important considerations may include:

  • Moisture
  • Temperature
  • Sun exposure
  • Packaging protection

For synthetic/light-colored binder, the exact handling procedure depends on the product form and formulation.

 Request Technical Documents When Needed

For engineering projects, buyers may request:

  • TDS
  • SDS/MSDS
  • Product specifications
  • Mix recommendations
  • Application guidance

However, the project mix design should still be verified using local materials and project requirements.

A supplier's general product sheet cannot replace project-specific engineering design.

 Do Not Compare Quotations by Price Alone

Suppose Supplier A offers a lower price per ton.

Supplier B offers a slightly higher price.

The two offers may not include the same:

  • Binder
  • Pigment
  • Dosage
  • Packaging
  • Technical support
  • Shipping terms

Before comparing prices, confirm that both quotations are based on the same specification.

Otherwise:

USD/ton vs USD/ton

may not be a meaningful comparison.

 Ask What Is Included in the Price

The quotation should clearly state whether it includes:

  • Binder
  • Pigment
  • Aggregate
  • Additives
  • Packaging
  • Freight
  • Taxes
  • Installation

For international material supply, aggregate and installation are often sourced locally.

Never assume they are included.

 Example: Red Bike Lane RFQ

A useful RFQ could look like this:

Project: Urban Bike Lane
Location: Bangkok, Thailand
Area: 4,000 m²
Color: Red
Compacted Thickness: 30 mm
Traffic: Bicycles + occasional maintenance vehicles
Existing Surface: New asphalt base
Local Aggregate: Available
Asphalt Plant: Local batch plant available
Required Materials: Light-colored binder + iron oxide red pigment
Trial Mix: Required
Quotation Term: CIF Bangkok area / nearest suitable port

This gives the supplier enough information to begin meaningful technical and commercial discussions.

Example: Yellow Landscape Road RFQ

Project: Landscape Park Road
Area: 2,500 m²
Target Color: Bright Yellow
Traffic: Pedestrians + light maintenance vehicles
Aggregate: Light grey local crushed stone
Thickness: 30–40 mm
Construction: New pavement
Requirement: Binder + pigment + trial sample

Because yellow is sensitive to aggregate and binder color, the supplier may request a local aggregate sample before finalizing pigment dosage.

 Example: 100 Tons of Colored Asphalt

Suppose a preliminary project uses the following reference formulation:

5% light-colored binder
2.5% pigment
92.5% aggregate

For 100 tons of total mixture:

  • Light-colored binder: 5 tons
  • Pigment: 2.5 tons
  • Aggregate: 92.5 tons

For an overseas project, if the aggregate is sourced locally, the main imported quantities may therefore be approximately:

7.5 tons of specialized materials

rather than shipping the entire 100-ton mixture internationally.

This is only a preliminary reference calculation.

The final mix design must be confirmed through trial mixing and project requirements.

Questions Buyers Should Ask the Supplier

Before placing an order, ask:

  1. Which binder is suitable for my target color?
  2. What pigment system do you recommend?
  3. Can my local aggregate be used?
  4. Do you recommend a trial mix?
  5. What material quantities are required?
  6. What is the packaging?
  7. What is the production lead time?
  8. What is the shipping method?
  9. What technical support is available?
  10. What information should the asphalt plant receive?

These questions are far more useful than asking only:

“What is your lowest price?”

 Common RFQ Mistakes

Sending Only the Project Area

Thickness is still needed.

Asking for Price Before Choosing a System

Different pavement systems have very different costs.

Not Providing the Destination

Freight cannot be calculated accurately.

Ignoring Local Aggregate

Aggregate strongly affects both performance and color.

Requesting a Bright Color Without Trial Mixing

The actual pavement may differ from the rendering.

Comparing Suppliers Only by Pigment Price

Colored asphalt performance depends on the complete material system.

A Better RFQ Workflow

Use:

Application → Area → Thickness → Traffic → Color → Base → Local Aggregate → Asphalt Plant → Trial Mix → Quantity → Shipping → Quotation

Not:

“How much is red asphalt?”

A detailed RFQ saves time for both buyer and supplier.

Hot-Mix Colored Asphalt RFQ Template

Buyers can copy this template:

Project Name:
Country / City:
Application:
Project Area: ___ m²
Required Color:
Compacted Thickness: ___ mm
Traffic Type:
New Construction / Renovation:
Existing Base:
Local Aggregate Available: Yes / No
Local Asphalt Plant Available: Yes / No
Required Materials:
Trial Sample Required: Yes / No
Expected Quantity:
Destination Port:
Expected Construction Date:
Reference Photos / Drawings:

Providing this information makes technical evaluation and quotation much faster.

Final Thoughts

A good hot-mix colored asphalt RFQ should describe the complete project—not just the required color.

The supplier needs to understand:

Application + Traffic + Area + Thickness + Aggregate + Binder + Pigment + Production + Logistics

When these details are clear, it becomes much easier to determine:

  • Material quantities
  • Suitable binder
  • Pigment requirements
  • Trial-mix strategy
  • Shipping cost
  • Total project budget

For international projects, one of the most practical approaches is often:

Local Aggregate + Local Asphalt Plant + Imported Specialized Binder and Pigment

followed by a trial mix before mass production.

For hot-mix colored asphalt materials, light-colored binder, iron oxide pigments, trial samples or project quotations, contact:

Henan Fuxin New Materials Technology Co., Ltd.

WhatsApp: +86 157 1143 5135

评论

此博客中的热门博文

How Far Can Hot-Mix Colored Asphalt Be Transported? Temperature, Distance & Delivery Guide

How to Source Local Aggregate for Hot-Mix Colored Asphalt Overseas Projects

Hot-Mix Colored Asphalt vs Cold-Mix Colored Asphalt: Which Is Better for Your Project?